1/24 Scale Spitfire Mk 1 Pilot Seat & Framework ...

29,-

Designed specifically to replace the overscale and poorly shaped part in the Airfix MkIa kit, my rendition if carefully assembled features a fully functional height adjustment mechanism. The kit depicts the early, all metal construction seat and consists of 16 individual printed parts.

1/24 Scale Spitfire Mk 1 Rudder Pedal Assembly ...

15,-

This highly detailed and correctly scaled rendition of the early mark Spitfire rudder pedal assembly is in 5 pieces: 2x single step rudder pedal with embossed "Supermarine" logo, 1x rudder lever, and 2x rudder linkage rods complete with star adjusting wheel and eyes for cable attachments. Assemble with .5mm brass tubing or rod at lever/linkage hinges. Shown next to overscale old tool Airfix rendition.

1/24 Scale Spitfire Mk 1 Throttle Quadrant ...

15,-

The first 173 or so Spitfires were fitted with fixed, two blade wooden propellers. Starting with airframe K9961 the fixed propeller was supplanted by a 2 position metal DeHavilland unit. This two speed propeller was controlled by a plunger attached directly to the fuselage wall. Therefore, though the throttle quadrant assembly appears from the outset to have been designed to accommodate a concentric pitch control lever, they were not so fitted until constant speed propellers began to be retrofitted in June 1940, at which point the throttle quadrant was replaced entirely with the later style.   interestingly, information on the Rotol constant speed propellers fitted experimentally fitted to Spitfire Mk Is in early 1940 is scarce. It appears to be lost to time as to what the propeller cockpit controls were like for these machines, although logic dictates they were most likely the same as the later controls — I.e. incorporated into the throttle quadrant. Our package cosists of 7 parts to build the early version of the Spitfire Mk I throttle quadrant. When carefully assembled, the mixture and throttle controls are operable within their gates.